Single thread silicon carbide rod_Silicon carbon rod_Product Center_Zibo Dereizi Electric Heating Element Co., Ltd.

Single thread silicon carbide rod

LDThe heating part of the silicon carbide rod is made of special material，the density reaches2.8g/cm3, the highest operating temperature1650°C，the service life is super long， the two ends are wired an

Online consulting Contact us

Product features

LDThe heating part of the silicon carbide rod is made of special material，the density reaches2.8g/cm3, the highest operating temperature1650°C，the service life is super long， the two ends are wired and interchangeable，But with GDHGDswap。

Model : LD Outer Diameter :OD

Heating part length : HZ

Cold end length : CZ

Overall length : OL

For example LD type OD=25mm HZ=300mm CZ=200mm OL=500 resistance:1.3ohm

expressed as:LD 25/300/500/1.3ohm

2-3

5-1

6-1

6-2

Technical indicators

LD 硅碳棒					Aluminium spray length
					diameter(mm)		length(mm)
					Φ16		30+10- 5
					Φ20 Above		50+20- 10
Specificatio	diametermm	hot area mm	cold end mm	total length mm	surface area cm²			resistance ±20%
Specificatio	diametermm	hot area mm	cold end mm	total length mm	surface area cm²	Voltage V	power W	resistance ±20%

LD14200200	14	200	200	600	87	59	1650	2.11
LD14200250		200	250	700	87	60	1680	2.14
LD14250200		250	200	650	109	71	1990	2.53
LD14250250		250	250	750	109	73	2040	2.61
LD14300250		300	250	800	131	85	2380	3.04
LD16200250	16	200	250	700	100	58	1970	1.71
LD16250200		250	200	650	125	69	2350	2.03
LD16250250		250	250	750	125	70	2380	2.06
LD16250300		250	300	850	125	71	2410	2.09
LD16300200		300	200	700	150	81	2750	2.39
LD16300250		300	250	800	150	82	2790	2.41
LD16300300		300	300	900	150	83	2820	2.44
LD16350250		350	250	850	175	94	3200	2.76
LD16350300		350	300	950	175	95	3230	2.79
LD20300400	20	300	400	1100	188	84	3440	2.05
LD20350400		350	400	1150	219	97	3980	2.36
LD20400400		400	400	1200	251	109	4470	2.66
LD20450400		450	400	1250	282	121	4960	2.95
LD25300400	25	300	400	1100	235	84	4120	1.71
LD25300500		300	500	1300	235	86	4210	1.76

LD25400400		400	400	1200	314	110	5390	2.24
LD25500400		500	400	1300	392	135	6620	2.75
LD30300400	30	300	400	1100	282	79	4980	1.25
LD30300500		300	500	1300	282	80	5040	1.27
LD30400400		400	400	1200	376	103	6490	1.63
LD30400500		400	500	1400	376	104	6550	1.65
LD30500400		500	400	1300	471	127	8000	2.02
LD30600400		600	400	1400	565	151	9510	2.40
LD35400400	35	400	400	1200	439	101	7680	1.33
LD35400500		400	500	1400	439	102	7750	1.34
LD35500400		500	400	1300	549	124	9420	1.63
LD35500500		500	500	1500	549	125	9500	1.64
LD35600400		600	400	1400	659	148	11200	1.96
LD35700400		700	400	1500	769	171	13000	2.25
LD40500400	40	500	400	1300	628	116	10700	1.26
LD40500500		500	500	1500	628	117	10800	1.27
LD40600400		600	400	1400	753	138	12700	1.50
LD40700400		700	400	1500	879	161	14800	1.75
LD45700450	45	700	450	1600	989	149	16800	1.32
LD45800400		800	400	1600	1130	168	19000	1.49

Matters needing attention

Note：LD for A single thread